RASOR FP861V, Руководство пользователя

Страница: 8 / 16

EN
8
9. RESIDUAL RISKS
8. USE WARNINGS
We recommend following the indications below in order to always work in safety conditions.
· All the operations must be carried out complying strictly with the safety rules of the
country where the fixture is sold.
·
It is STRICTLY FORBIDDEN to smoke during the installation or adjustment operations of
the cutting unit.
· The Customer undertakes to comply with and make his staff observe all the rules and
regulations in force concerning safety, prevention of accidents and health in the work
place. Therefore, the Customer assumes the responsibility to strictly follow all the rules and
regulations in force, as well as the special provisions in force in sport and public installations
the Customer declares to know after receiving all the relative necessary information.
· The cutting unit works also without their safety protective device. This protective device
must NEVER be removed.
· Always check the resistance of the material to be cut and the kind of blade which is being
used.
· The Customer shall equip his own personnel with all the individual safety protections for
the execution of the works, as well as with the ones which might be prescribed by the
Manufacturer due to specific danger conditions of the plant or of the area where the
personnel must work.
· Do not carry out any adjustment while the blade is working.
· Always pay attention to the position of the air pipe to prevent it from being cut or
damaged by the blade.
· It is possible to assemble cutting unit FP861V on machines O.E.M. only if their original
structure is not modified. Otherwise, the intervention must be certified by Rasor
®
.
L
The cutting blade can work even when the protective device is disassembled.
Even though the cutting unit is safe, operators must pay attention to preserve their and
other people’s safety.