RASOR FP861V, Руководство пользователя

Страница: 3 / 16

EN
3
1. GENERAL SAFETY RULES
This manual is an integral part of cutting unit FP861V and must be carefully
read before using it since it gives important indications with regards to its safe
installation, use and maintenance. Keep it with care.
Before using cutting unit FP861V, read carefully the following general safety
rules.
• PACKAGING.
After taking off the packaging make sure that the cutting unit is intact. In case of
doubt do not use it and contact an authorized service centre. Do not leave pieces of
packaging (plastic bags, foam polystyrene, boxes, etc.) within the reach of children
or disabled persons since they are potential sources of danger.
• AVOID DANGEROUS ENVIRONMENTS.
• KEEP CHILDREN AWAY.
Unauthorized persons, in particular children, must be kept away from the working
area.
• KEEP THE WORKING AREA ALWAYS IN ORDER.
The workplace must always be kept in order and well lightened.
• ALWAYS USE CUTTING UNIT FP861V PROPERLY.
Use the cutting unit only to carry out the works they have been designed for; do
not use them improperly.
• OBSERVE THE USE OF THE TOOLS.
Do not cut excessively thick materials and always check blade conditions.
• AVOID ACCIDENTAL STARTINGS.
Before connecting cutting unit FP861V, make sure that everything is installed properly.
• CLOTHING.
Do not use large clothes or accessories that might get stuck in the moving parts.
• GOGGLES AND PROTECTIVE METAL MESH GLOVES.
Always use goggles, protective metal mesh gloves approved by Rasor
®
during use
and maintenance operations (according to UNI EN 388:2004 standard).
• SPARE PARTS.
During maintenance and replacement operations use only original spare parts.
Blade maintenance must be only performed by Rasor
®
technicians.
• INSTALLATION.
Any installation that is not in conformity with these specifications could jeopardize
your safety and cancels the warranty.