RASOR D86P2, Руководство пользователя

Страница: 7 / 15

EN
7
7. FIELD OF APPLICATION
6. NOISE LEVEL
5. TECHNICAL FEATURES
The technical data are only indicative and they can be changed without notice.
NOTE
It is advisable for bench cutter D86P2’s owners to verify the compliance with the standard
concerning safety of workers: Italian legislative decree 81/08. The use of ear protecting
devices is compulsory.
The maximum acoustic pressure level emitted by bench cutter D86P2 is about 60 dB (A).
Noise tests have been carried out in compliance with Standard ISO 11202:2010. The device
noise levels, measured at different distances (without any sound wave filtering system), vary
in the extent of few db (A).
Bench cutter D86P2 has been designed, manufactured and assembled to cut every kind of
fabrics or materials, with the exception of metal, plastic or wood, by means of rotary poligonal
blades.
This equipment must not work:
- in areas prone to explosions;
- in presence of fine dust or corrosive gases;
- on wet or damp materials;
- to cut plastic, metal and wooden materials.
It is forbidden to use bench cutter D86P2 for purposes different from the above-
mentioned ones.
86 mm with hard metal counter
blade
850 rev./min
about 25 mm
monophase - 90 W
1 A
2,900 Kg
3,900 Kg
1,5 mt
LUX 200
< 2,5 m/s
2
0 ~ 55°C
10 ~ 95% without condensate
Temperature
Humidity
Weight with package
Electric cable lenght
Minimum luminosity for working
operations
Vibrations at the start up
Cutting working depth
Motor power
Weight (with feeding cable)
Table cutter D86P2 features
Blade diameter
Blade speed
Absorption
5 side blade Ø 86 mm, in HSS steel
8 side blade Ø 86 mm, in HSS steel
5 side blade Ø 86 mm, in HSS steel
covered with Teflon
®
8 side blade Ø 86 mm in HSS steel
covered with T.I.N.
8 side blade Ø 86 mm, in HSS steel
covered with Teflon
®
8 side blade Ø 86 mm, in hard integral
metal (Widia
®
)
86TMD
86THSSTN
Features of the available blades
86PHSS
86THSS
86PHSSTF
86THSSTF