EN
3
1. GENERAL SAFETY RULES
This manual is an integral part of bench cutter D86P2 and must be carefully
read before using it since it gives important indications with regards to its safe
installation, use and maintenance. Keep it with care.
Before using bench cutter D86P2, read carefully the following general safety
rules.
•
PACKAGING.
After taking off the packaging make sure that the bench cutter is intact. In
case of doubt do not use it and contact an authorized service centre. Do not
leave pieces of packaging (plastic bags, foam polystyrene, boxes, etc.) within
the reach of children or disabled persons since they are potential sources of
danger.
•
AVOID DANGEROUS ENVIRONMENTS.
Prevent the bench cutter D86P2 components from coming in contact with
damp or wet surfaces.
•
KEEP CHILDREN AWAY.
Unauthorized persons, in particular children, must be kept away from the
working area.
•
FEED CABLE.
Prevent the feed cable from coming in contact with hot objects, pointed
surfaces or sharp edges. Never pull the feed cable of the machine. It must
never be replaced by the user. If necessary contact professionally qualified
staff.
•
KEEP THE WORKING AREA ALWAYS IN ORDER.
The workplace must always be kept in order and well lightened; liquids or oil
traces must not be present.
•
ALWAYS USE BENCH CUTTERS D86P2 PROPERLY.
Use the bench cutters only to carry out the works they have been designed
for; do not use them improperly.
•
OBSERVE THE USE OF THE TOOLS.
Do not cut excessively thick materials and always check blade conditions.
•
AVOID ACCIDENTAL STARTINGS.
Before connecting bench cutter D86P2, make sure that everything is installed
properly.
•
CLOTHING.
Do not use large clothes or accessories that might get stuck in the moving
parts.
•
GOGGLES AND PROTECTIVE METAL MESH GLOVES.
Always use goggles, protective metal mesh gloves approved by Rasor
®
during
use and maintenance operations (according to UNI EN 388:2004 standard).
•
SPARE PARTS.
During maintenance and replacement operations use only original spare parts.
Blade maintenance must be only performed by Rasor
®
technicians.
•
INSTALLATION.
Any installation that is not in conformity with these
specifications could jeopardize your safety and cancels the
warranty.
Содержание D86P2
Страница 1: ...D86P2 BENCH CUTTER use manual ...
