RASOR D86P2, Руководство пользователя

Страница: 6 / 15

6
EN
4. PRODUCT DESCRIPTION
The fixtures described in this manual is a bench cutter model D86P2 which is used in order
to cut resistant material. By cutting with the blade and the counterblade always in contact
and thanks to the steel upper quality of the blade supplied, D86P2 cutter guarantees the
clean separation without frayings of the two borders of the cut material. It is extremely
versatile, light and precise in the cutting operation. Thanks to the use of a sliding bearing
base and an effective sharpening system, it is possible to use the bench cutter to cut curved
profiles not only in the textile and tan sector, but also in several industrial sectors such as to
cut polymers, thermoacoustic insulators, padding, neoprene, filters, synthetic fabrics and
similar fabrics, moquette and internal parts of cars and ships. The small dimensions of the
blade (86 mm) and the light weight (only 2900 g) of the cutter, make it ideally suited for
small radius cut profiles on materials with thickness up to 2,5 cm. The wide sliding bearing
base allows the operator to slide the cutter on the table without efforts. A sharpener
assembled on the cutter heads allows whetting the blade at any moment without
disassembling it. After carrying out this operation, it is possible to start cutting again. A high
power motor, perfectly balanced, with a high number of revolutions and totally free of
maintenance, reduces the vibrations to the minimum, thus making the bench cutter complies
with Legislative Decree No. 187 dated 19/8/2005, which adopts European Directive No.
2002/44/CE concerning the risks deriving from mechanical vibrations.The mechanical parts are
made of high resistance steel and bronze and require lubrication after several working hours.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 Switch provided with light 9 Poligonal blade
2 Motor cover 10 Spring locking the thread
3 Socket 11 Greaser
4 Motor frame 12 Fixed back protection
5 Sharpening push button 13
Safety catch to enable the
control lever
6 Motor support 14 Control lever
7 Movable front protection 15 Handle
8
Roll platform covered with
Teflon
®
16 Hard metal counter blade
Device components