Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507
|
|
951-654-3585
rashaprofessional.com
|
|
9
Before mounting this product, read and follow the Safety Notes. For our
Rasha
®
Professional line of mounting clamps, go to
https://www.rashaprofessional.com/clamps
Orientation
Always mount this product in a safe position and make sure there is adequate room
for ventilation, configuration, and maintenance.
Rigging
Rasha recommends using the following general guidelines when mounting this
product.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as
indicated in the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support
the product’s weight. See the Technical Specifications for the weight-bearing
requirements of this product.
• When hanging this product, always secure to a fastening device using a safety
cable.
Procedures
The
Tubby 360
comes with a pre-threaded screw hole for mounting clamp.
Make sure the clamps are bolted proprely and capable of supporting
the weight of this product. Use at least 1 mounting point per product.
In addition, use a safety cable to link the product to the structure.
MOUNTING
Display:
Button:
To show Menu options and the selected functions
SETTING
DOWN
UP
ENTER
To confirm the selected functions
To go forward in the selected functions
To go backward in the selected functions
To select the programming functions
Dimmer Curve
•
Select Dimmer Curve.
•
Press ENTER button to confirm (present mode will blink on the display)
•
Use UP or DOWN button to select: Curve 1(Linear Curve) Curve 2 (Square Curve), Curve 3
Square Law and Curve 4 (S-Curve)
•
Once selected, press ENTER button to store (Save)
•
Press MENU button to access the previous menu
