Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507
|
|
951-654-3585
rashaprofessional.com
|
|
5
Safety Notes
Read all the following Safety Notes before working with this product. These notes
include important information about the installation, usage, and maintenance of
this product. This product contains no user-serviceable parts. Any reference to
servicing in this User Manual will only apply to properly trained Rasha certified
technicians. Do not open the housing or attempt any repairs. All applicable local
codes and regulations apply to proper installation of this product.
Personal
Safety
Avoid direct eye exposure to the light source while the product is on. Always
disconnect this product from its power source before servicing. Always
connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be very hot.
Rigging
This product is for indoor use only! To prevent risk of fire or shock, do not expose
this product to rain or moisture. (IP20) CAUTION: When transferring product
from extreme temperature environments, (e.g. Cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product.
To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power. Mount this product in a location
with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces. Make
sure there are no flammable materials close to this product while it is operating.
Always carry this product by the handles. Do not carry from the head. When
hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
Always make sure you are connecting this product to the proper voltage
in accordance with the specifications in this manual or on the product’s
specification label. Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Operation
Do not operate this product if you see damage to the housing, lenses, or
cables. Have the damaged parts replaced by an authorized technician at once.
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it. Do not cover the ventilation slots when operating to avoid
internal overheating. Do not aim this product toward the Sun. The lenses could
concentrate the solar energy and cause internal overheating. The maximum
ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature. In case of a serious operating problem, stop using this product
immediately!
The term “DMX” used throughout this manual refers to the DMX512 digital data
transmission protocol
