Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507
|
|
951-654-3585
rashaprofessional.com
|
|
8
SETUP
Power Supply
Each
Tubby 360
has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each
Tubby 360
refer to the label affixed to the product. You can also refer to the Technical
Specifications chart in this manual The
listed current rating indicates the maximum current draw during normal
operation. For more information, you may download Sizing Circuit Breakers from
the Rasha website: www.rashaprofessional.com
Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or fire. To eliminate
unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The
Tubby 360
comes with a Charger with A connector on one end and an Edison
plug on the other end (U.S. Market). If the power input cord that came with your
product has no plug, or if you need to change the Edison plug, use the table below
to wire the new plug.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same type and
rating (F 10 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating
Power Linking
On 20 AMP circuit, you can link up-to 5 Fixtures @ 120V While charging
DMX
Personalities
• The
Tubby 360
uses a 3 pin DMX data connection for the
4A/4B/6A/6B/7/12/40/80/160 channel DMX personalities.
• Refer to the Introduction chapter for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the
Tubby 360
to work
in these personalities.
• The DMX Values section provides you with detailed information regarding the
DMX personalities
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
