Raritan Z-SERIES -, Руководство пользователя

Страница: 15 / 29

Installation 7
Installing More Computers
Repeat steps 1 through 3 below to add computers to the Z-Series Z4200U chain. Name and test each computer as it is
added.
Note:
Z-Series Z4200U installation requires that each computer be assigned a channel name as it is added
to the 4200 chain, adhering to the order of the installation steps that follow. Computer channels are
organized alphabetically by assigned name (or the default name which is the Z-CIM’s serial number), rather
than in the order of their placement within the Z4200U chain. Installers that first connect all computers and
then attempt to assign channel names will have difficulty locating the respective channel for each computer.
Note
:
All newly added Z-CIMs and computers must be powered OFF prior to installation.
1.
Attach Z-CIM to computer to be added
For UKVMSC Z-CIM (Figure3) – with local port:
•
Connect CCPxx cable’s 6-pin mini-DIN and HD15 connectors to computer’s keyboard, mouse, and
video ports.
•
Connect DB25 male end of CCPxx cable to DB25 female port on back of Z-CIM (UKVMSC).
For UKVMSPD Z-CIM (Figure 3):
•
Attach the Z-CIM to the computer via its HD15 video port. Connect the 6-pin mini-DIN keyboard and
mouse connectors on the UKVMSPD Z-CIM to computer’s keyboard and mouse ports.
For UKVMSP Z-CIM:
•
Connect the 6-pin mini-DIN keyboard and mouse, and HD15 video connectors on the UKVMSP Z-CIM to
computer’s keyboard, mouse, and video ports.
2. Attach Z-CIM to Z4200U chain
•
Remove Z-CIM Terminator from the last Z-CIM’s UTP IN port and set aside.
•
Connect a Category 5e UTP cable to the UTP IN port on the Z-CIM that is currently last in the chain.
•
Connect the other end of this Category 5e UTP cable to the UTP OUT port on the next Z-CIM/computer
currently being added to the chain.
•
Place the Z-CIM Terminator in the added Z-CIM’s UTP IN port.
•
Power ON computer.
•
Press the default hot key <Scroll Lock> twice rapidly at the USTS User Console to bring up the On-Screen
User Interface (OSUI).
•
Press <F2> to bring up the Selection Menu.
•
The new computer will appear as a new channel on the Selection Menu at the User Console of the USTS. A
factory name and serial number for the Z-CIM will display.
•
Optional: For a UKVMSC see page 7 to install a local user console.
3. Name Computer & Test Operation
•
At the Selection Menu, press < F3 > to bring up the Edit Menu.
•
The Edit Menu will display, with a yellow highlight on the name of the computer just added.
•
Press < Enter >. Highlight turns light green
•
Type in a desired computer name and press < Enter > when completed. Highlight area will turn yellow.
•
Press < S > to save the new name.
•
Press < F2> to return to the Selection Menu.
•
The Selection Menu will display with the new computer name highlighted in white.
•
Press < Enter > to switch to this selected computer.
•
Normal computer access and operation indicates a successful connection.