Raritan Z-SERIES -, Руководство пользователя

Страница: 14 / 29

6 Installation
2. Connect One Computer to USTS using Z-CIM (Figure 5):
For UKVMSC Z-CIM (Figure 3) with local port:
•
Connect DB25 male end of CCPxx cable to DB25 female port on back of a Z-CIM (UKVMSC). Connect
other end to computer’s keyboard, video, and mouse ports.
•
Connect a Category 5e UTP cable to the UTP OUT port on the Z-CIM (UKVMSC).
•
Connect the other end of this Category 5e UTP cable to the RJ45 Cat 5 port on the User Station
(USTS).
•
Place the Z-CIM Terminator in the Z-CIM’s UTP IN port.
•
Power ON computer.
•
A factory name and serial number for the Z-CIM will display on the Selection Menu of the User Console
attached to the USTS. This represents the connected computer.
•
Optional: See page 7 to install a local user console.
For UKVMSPD Z-CIM (Figure 3) :
•
Attach the Z-CIM to the computer via its HD15 port. Connect the 6-pin mini-DIN keyboard and mouse
connectors on the Z-CIM to computer’s keyboard and mouse ports.
•
Connect a Category 5e UTP cable to the UTP OUT port on the Z-CIM (UKVMSPD).
•
Connect the other end of this Category 5e UTP cable to the RJ45 Cat 5 port on the User Station (USTS).
•
Place the Z-CIM Terminator in the Z-CIM’s UTP IN port.
•
Power ON computer.
•
A factory name and serial number for the Z-CIM will display on the Selection Menu of the User Console
attached to the USTS. This represents the connected computer.
For UKVMSP Z-CIM:
•
Connect the 6-pin mini-DIN keyboard and mouse, and HD15 video connectors on the UKVMSP Z-CIM to
computer’s keyboard, mouse, and video ports.
•
Connect a Category 5e UTP cable to the UTP OUT port on the Z-CIM (UKVMSP).
•
Connect the other end of this Category 5e UTP cable to the RJ45 Cat 5 port on the User Station (USTS).
•
Place the Z-CIM Terminator in the Z-CIM’s UTP IN port.
•
Power ON computer.
•
A factory name and serial number for the Z-CIM will display on the Selection Menu of the User Console
attached to the USTS. This represents the connected computer.
3. Name Computer & Test Operation
•
While viewing the Selection Menu, press < F3 > to open the Edit Menu.
•
The Edit Menu (Figure 10) will display, with a yellow highlight on the name of the computer just added.
•
Press < Enter >. Highlight turns green
•
Type in a desired computer name and press < Enter > when completed. Highlight area will turn yellow.
•
Press < S > to save the new name.
•
Press < F2> to return to the Selection Menu.
•
The Selection Menu will display with the new computer name highlighted in white.
•
Press < Enter > to switch to this selected computer.
•
Normal computer access and operation indicates a successful connection.
4. Congratulations! Quick Start is complete
5.
Proceed to the next section, “Installing More Computers,” to add more computers to the Z4200U
chain.