Raritan PX3-1000 series, Руководство пользователя

Страница: 50 / 744

Chapter 3: Initial Installation and Configuration
28
2. Retrieve the DHCP-assigned IPv4 address. Use the front panel LCD
display to retrieve it. See
Device Info
(on page 111).
3. Launch a web browser to configure the PX3. See Login (on page
127).
Configuration using a connected computer:
1. Connect the PX3 to a computer. See Connecting the PX3 to a
Computer
(on page 28).
2. Use the connected computer to configure the PX3 via the command
line or web interface.

Command line interface: See
Initial Network Configuration via
CLI (on page 32).

Web interface: Launch the web browser on the computer, and
type the link-local IP address or
pdu.local to access the PX3. See
Login (on page 127).
For link-local IP address retrieval, see
Device Info
(on page 111).
Tip: To configure a number of PX3 devices quickly, see Bulk
Configuration Methods (on page 37).
Connecting the PX3 to a Computer
The PX3 can be connected to a computer for configuration via one of the
following ports.

USB-B port (male)

ETHERNET port (female)

RS-232 serial port (model dependent -- male DB9 or female RJ-45
connector)
Note that the port locations on your models may differ.

PX3 models: