Raritan Paragon II, Руководство по развертыванию

Страница: 43 / 64

C
HAPTER
7: A
DDING
A P
ARAGON
II S
YSTEM
T
O
C
OMMAND
C
ENTER
S
ECURE
G
ATEWAY
35
18. Select the added Base Units in the P2SC Admin Device View window and right-click on it.
When the shortcut menu appears, click
Property. The Device Information Editor window
appears.
Figure 29 Selecting a Base UMT In The Device Window
Figure 30 The Device Information Editor Window
19. Type a new identifier for the Base Unit in the Name field and click OK .
20. Repeat steps 16 and 17 for each Base Unit you wish to uniquely identify.
21. To rename your targets devices in the Device View window and make them identifiable from
CommandCenter Secure Gateway, first expand a Base Unit to display its channel ports.
22. Right click on a channel and select Property . The Channel Information Editor window
appears.
Figure 31 Selecting a KVM Channel In The Device Window
Figure 32 The Channel Information Editor Window
23. Type a name for the device on this channel in the Name field.
24. Select a type for the device on this channel, either CPU for target servers or one of the
Raritan PowerStrips or non-Paragon switches listed.
25. When finished, click OK , or click Cancel to exit without saving.
26. Repeat steps 21-25 for each target you wish to name.