Raritan Paragon II, Руководство по развертыванию

Страница: 24 / 64

16 P
ARAGON
II / C
OMMAND
C
ENTER
I
NTEGRATION
S
OLUTIONS
D
EPLOYMENT
G
UIDE
Initial Configuration: Setting Stacking Support, Stacking
Test, and IP Address
Because Paragon II and CommandCenter Integration enables the configuration of the Paragon II
Base Units via CommandCenter Secure Gateway, initial configuration includes designating
stacking order, testing stacking support, and assigning an IP Address to the Base Unit.
1. Stacking Support: With the unit powered ON, press the
S
or
T
button to set Stacking Unit
ID number (0 or 1 for a P2-UMT1664, 0 – 3 for a P2-UMT832). The default is 0 (no Stacking
Units connected). To add Stacking Units, this number must be equal to the number of
Stacking Units connected. Press
ESC to return to normal display.
2. Test Stack Unit: Press the
S
or
T
button to select the corresponding Stacking Unit ID for
any connected units. If there are no Stacking Units connected, the LCD will display None . If
there are Stacking Units connected, the LCD will read OK for each unit. Press ESC to return
to normal display.
Stacking Support
Unit(s): 0-1
3. Set IP Address: As administrator, you may change Paragon II’s IP address directly from the
front panel of the device. Use the
W
and
X
keys on your keyboard to move the cursor over
digit-by-digit, and use the
S
or
T
arrow keys to change the value of that digit. Press the
ENT button on the front panel when the new IP address has been set. Press the ENT button
again to save changes and reboot the unit when asked to Save Changes? The unit will restart
with the new address. You must assign an IP Address for every Main Unit (Base Unit) in
your configuration, and all must be a part of the same subnet for successful integration.
Please refer to Raritan’s Paragon II User Guide for additional information on Paragon II Front
Panel functionality.