EMX Quick Setup Guide
2
QSG-EMX-1A-v3.3.10-E
255-80-6106-00 RoHS
Mount the device by screwing a mounting button in the
back center of each L-bracket and then having both
buttons engage the mounting holes in the rack. The
recommended torque for the button is 1.96 N·m (20
kgf·cm).
QS Rule
Mounting a 1U EMX
Using the appropriate brackets and tools, fasten the 1U EMX
device to the rack or cabinet.
To mount the 1U EMX device:
1.
Attach a rackmount bracket to both sides of the EMX with
the provided screws.
2.
Insert the cable-support bar into rackmount brackets.
3.
Secure with the provided end cap screws.
4.
Fasten the rackmount brackets' ears to the rack using
your own fasteners.
QS Rule
Introduction to Regular Asset Strips
Each tag port on the regular asset strips corresponds to a
rack unit and can be used to locate IT devices in a specific
rack (or cabinet).
For each rack, you can attach asset strips up to 64U long,
consisting of one MASTER and multiple SLAVE asset strips.
The difference between the master and slave asset strips is
that the master asset strip has an RJ-45 connector while the
slave does not.
