Chapter 4: Virtual KVM Client (VKC) Help
50
Configuring Port Scan Settings in VKC and AKC
Configuring port scan options in VKC and AKC applies to scanning from
the KX III Remote Console.
To configure port scan options for the Local Console, see
Configure
Local Console Scan Settings
(on page 92)
Use the port scanning feature to search for selected targets, and display
them in a slide show view, allowing you to monitor up to 32 targets at
one time.
You can connect to targets or focus on a specific target as needed.
Scans can include standard targets, blade servers, tiered Dominion
devices, and KVM switch ports.
Configure scan settings from either the Virtual KVM Client (VKC) or
Active KVM Client (AKC).
See
Scanning Ports - Remote Console
(on page 77)
Use the Scan Settings tab to customize the scan interval and default
display options.
Configure Port Scan
To set scan settings:
1. Click Tools > Options. The Options dialog appears.
2. Select the Scan Settings tab.
3. In the "Display Interval (10-255 sec):" field, specify the number of
seconds you want the target that is in focus to display in the center of
the Port Scan window.
4. In the "Interval Between Ports (10 - 255 sec):" field, specify the
interval at which the device should pause between ports.
5. In the Display section, change the default display options for the
thumbnail size and split orientation of the Port Scan window.
