Raritan dominion kx III, Руководство пользователя

Страница: 137 / 190

Appendix C: Specifications
129
Port Description
KVM-over-IP)
Protocol,
Configurable Port
5000 communication between Raritan devices and systems, including
CC-SG for devices that CC-SG management is available.
By default, this is set to Port 5000, but you may configure it to use any
TCP port not currently in use. For details on how to configure this
setting, see Network Settings.
SNTP (Time Server)
on Configurable
UDP Port 123 The KX III offers the optional capability to synchronize its internal clock
to a central time server.
This function requires the use of UDP Port 123 (the standard for
SNTP), but can also be configured to use any port of your designation.
Optional
LDAP/LDAPS on
Configurable Ports
389 or 636 If the KX III is configured to remotely authenticate user logins via the
LDAP/LDAPS protocol, ports 389 or 636 will be used, but the system
can also be configured to use any port of your designation.
Optional
RADIUS on
Configurable Port
1812 If the KX III is configured to remotely authenticate user logins via the
RADIUS protocol, either port 1812 will be used, but the system can also
be configured to use any port of your designation.
Optional
RADIUS Accounting
on Configurable Port
1813 If the KX III is configured to remotely authenticate user logins via the
RADIUS protocol, and also employs RADIUS accounting for event
logging, port 1813 or an additional port of your designation will be used
to transfer log notifications.
SYSLOG on
Configurable UDP
Port 514 If the KX III is configured to send messages to a Syslog server, then the
indicated port(s) will be used for communication - uses UDP Port 514.
SNMP Default UDP
Ports Port 161 is used for inbound/outbound read/write SNMP access and
port 162 is used for outbound traffic for SNMP traps.
Optional
TCP Port 22 Port 22 is used for the KX III command line interface (when you are
working with Raritan Technical Support).
SSH (Secure Shell) SSH port can be configured. The default is port 22.
Telnet Telnet port can be configured but is not recommended. The default port
is 23.
HTTP and HTTPS Port Settings
You are able to configure HTTP and/or HTTPS ports used by the KX III.
For example, if you are using the default HTTP port 80 for another
purpose, changing the port will ensure the device does not attempt to
use it.
To change the HTTP and/or HTTPS port settings:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.