Raritan DOMINION KSX II, Руководство пользователя

Страница: 286 / 362

Appendix A: Specifications
276
KSX II to KSX II Guidelines
The following system configuration guidelines should be followed when
you are using Paragon CIMs in a KSX II
to KSX II configuration:
Concurrent Access
Both KSX II KVM switches should be configured with the same policy for
concurrent access to targets, either both PC-Share or both Private.
If Private access to targets is required, both KVM switches must be
configured accordingly:

From Security > Security Settings > Encryption & Share, set PC
Share Mode to „Private‟
This guarantees that concurrent access to targets is prohibited, for all
targets by all user groups.
The KSX II allows for more granular control of concurrent access to
targets on a per user group basis. This is done by setting the user
group‟s PC Share permissions. However, this is only enforced within
the boundary of a KSX II. User Group PC Share permissions must not
be relied on if Privacy must be guaranteed when using the
P2CIM-APS2DUAL or P2CIM-AUSBDUAL with the KSX II.
CIM Name Updates
The P2CIM-APS2 and P2CIM-
AUSB names are stored within the CIM‟s
memory. There are two memory locations provided to accommodate
the Paragon naming convention (12 characters) and the KSX II naming
convention (32 characters).
When first connected to a KSX II, the Paragon name will be retrieved
from memory and written into the CIM memory location used by KSX II.
Subsequent queries for the CIM name or updates to the CIM name from
the KSX II will be made to the memory location used by the KSX II.
Updates will not be made by the KSX II to the memory location used by
Paragon II.
When the CIM name is updated by one KSX II, the other KSX II will
detect and retrieve the updated name on the next attempt to connect to
that target. Until that time, the name will not be updated on the other
KSX II.
Port Status and Availability
The port status, displayed on the KSX II Port Access page as either Up
or Down, is updated to show whether the CIM is powered up and
connected to the KSX II port.
The port availability, as displayed on the KSX II Port Access page as
Idle, Busy or Connected, is only updated to reflect activity on a target
that has been initiated from that same KSX II.