SE BRUKSANVISNING
16
RAPTOR LED-SLINGA: VARNING!
1. Anslut aldrig ljusslingan till strömförsörjning medan den är förpackad eller lindad på en rulle!
2. Ljusslangen får inte vridas, hängas vertikalt, hängas utan stöd på mitten eller böjas längs kortsidan:
Minsta böjningsdiameter = 8 cm. Vik inte LED-slingan under installationen.
3. Använd inte ljusslingan när den är täckt eller nedsänkt i någon vätska.
4. Du får inte klippa eller öppna ljusslingan.
5. Denna ljusslinga får inte användas utan att alla packningar/anslutningar är på plats.
6. Anslut inte ljusslingan till en annan tillverkares produkt.
7. Anslutningar får endast göras med de medföljande RAPTOR-anslutningarna. Alla öppna ändar
måste förslutas med ändkåpa innan de används.
8. Täck inte över produkten, eftersom det kan förorsaka överhettning, smältning eller brand.
9. Sänk inte ned ljusslingan i vätskor eller använd produkten i närheten av stående vatten eller andra
vätskor.
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
