NO BRUKERVEILEDNING
12
RAPTOR LED LYSLIST: ADVARSLER:
1. Koble aldri lyslisten til en strømforsyning mens det er pakket eller rullet på en snelle!
2. Ikke vri, heng vertikalt, ustøttet i midten eller bøy langs kortsiden:
Minimum bøyediameter er 8 cm. Ikke brett LED-listen under installasjonen.
3. Ikke bruk lysslangen når den er tildekket eller innfelt i en overflate.
4. Ikke åpne eller klipp i lysslangen.
5. Denne lysslangen må ikke brukes uten at alle pakninger/kontakter er på plass.
6. Ikke koble denne lysslangen til en annen produsents produkt.
7. Tilkoblinger skal kun gjøres ved bruk av de medfølgende RAPTOR-kontaktene. Eventuelle åpne
ender må forsegles med endeplugger før bruk.
8. Ikke dekk til dette produktet – kan forårsake overoppheting, smelting eller brann.
9. Ikke senk lyslisten ned i væsker eller bruk produktet i nærheten av stillestående vann eller
andre væsker.
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
