background image

11

train-set or large-scale throttles. With DC layouts, you have very little control over 

the sounds of your model.  

— WARNING —

Rapido products are designed to operate safely between 0V and 16V. 

Voltages in excess of 16V - as well as irregular waveforms, voltage spikes 

or short circuits - may cause severe and sometimes irreversible damage to 

the product. “Train set” power packs are known to suffer from any one of 

these unexpected irregularities, whereas higher-end systems have safeguards 

in place to prevent this. Rapido always recommends using a power supply 

system that matches the quality of the models you are running. If you’re 

reading this, you’ve obviously invested in top-of-the-line, museum-quality 

motive power and equipment, so we hope you’ve made the same investment 

with your model railroad power supply too.

While many power supply systems exist, some are known to have caused 

problems with model train circuitry in the past. If you have any one of the 

following systems, PLEASE DO NOT USE IT until you contact us for more 

information: MRC RailPower 1300/1370-series, Bachman Spectrum 

Magnum, Atlas 313 Universal Power Pack.

The DC lighting is limited. Some throttle manufacturers produce special gadget-like 

thingies which are meant to trigger the sounds in locomotives on DC layouts. As 

we have no involvement in the development of those gadget-like thingies, we have 

absolutely no idea how they will affect your F59PH, for good or for ill, for richer or 

poorer, in sickness and in … sorry, wrong transcript. As always, we’ll try to help you 

fix your F59PH if one of these gadget-like thingies turns your locomotive’s circuitry 

into something akin to burnt toast, but we can’t guarantee we’ll be able to.

It is usually at this point in the manual that Jason inserts a gentle dig at his fellow 

modelers who won’t switch from DC to DCC. The rest of the staff continue to repeatedly 

remind him what happened the last time he did that. Something about being chased 

down the county highway by a group of townsfolk wielding transformers and 

potentiometers. As long as we can keep reminding him of this event, he’ll be nice to 

DC modelers. Not that we’re calling DC modelers Luddites. 

OPERATION – DCC (SOUND)

We go to extreme lengths for accuracy, in sounds as well as in looks. Our sound 

decoders are LokSound V5 decoders by ESU, with Full Throttle functionality, 

Содержание F59PH






















Отзывы: