1
Rapid LED DIY Dimmer Kit (for ELN-60-48D)
I.
Overview
II.
Driver Notes
III.
Parts Included
IV.
Parts Required
V.
Tinning
VI.
Installing Potentiometers to Faceplate
VII.
Installing DC Jack to Faceplate
VIII.
Wiring Diagram
IX.
Completed Wiring Photo
X.
Installing Knobs to Potentiometers
XI.
Installing Faceplate
XII.
Wiring Dimmer to Driver(s)
XIII.
Using Your Dimmer
Overview
Thank you for purchasing a Rapid LED DIY Dimmer Kit. This dimming kit will allow you to
manually dim multiple Mean Well ELN-60-48D drivers. Depending on the specific application, it should
be able to dim up to 10 drivers without any problem. With this kit, use only the included AC adapter.
Use of any other adapter may possibly damage the dimming circuitry in your driver(s).
General Driver Notes
The Mean Well ELN-60-48D dimmable driver accepts a 0-10V reference voltage signal on wires
Dim+ (blue), and Dim- (white). The included AC adapter will provide the reference voltage and two
potentiometers will allow you to vary the voltage between 0-10V, thus dimming the driver. The higher
the reference voltage, the brighter the LEDs will be, the lower the reference voltage, the dimmer the
LEDs will be.
