Rapid Engineering 2000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 35 / 101

SECTION 11: I
NLET
H
OOD
29
Step 11.2. 8 Attach the remaining filter rails and the rain g u tters to the u pper and lo w er hood sides w ith the
pro v ided ri v ets.
Step 11.2.9 Attach filter retaining latches w ith the pro v ided ri v ets.
Step 11.2.10 Ca u lk seam bet w een air handler and inlet hood.
Step 11.2.11 Load filters into the inlet hood, checking to see that each filter is in the proper orientation by v er-
ifying that the arro w on the side of the filter points in the direction of air flo w . All of the arro w s sho u ld be point-
ing to w ards the air handler w hen installed in the proper orientation. Once filters are installed, close filter clips
installed pre v io u sly
Inlet Hood Mounted Poly Panel Filters
Model Filter Size Alum Mesh Actual Size Quantity Poly P/N Alum P/N
2005
25x25 25x25 1 P-000750 P-001218
2010 24x20 24x19.5 6 02243 66502
2010B
24x20 24x19.5 5 02243 66502
20x20 19.6x19.6 5 P-000707 20730
2020
25x25 25x25 12 N/A P-001218
50x25 N/A 6 P-000960 N/A
2030
25x25 25x25 18 P-000344 P-001218