Rapid Engineering 2000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 101

SECTION 7: R
OOF
15
FIGURE 5: Roof Curb Assembly
NOTE:
*Blo w er and B u rner Section
**Blo w er, B u rner and Mixbox
*** Split sides and Cross Brace for Model 2030
• C u rb is shipped u nassembled.
• A and B are o u tside dimensions for the top of the c u rb.
• C u rb material is 14 ga u ge gal v anized steel.
• N u ts and bolts (3/8" x 1") are f u rnished.
• Ca u lk all joints before assembling. (Ca u lk pro v ided by others)
Caulk required for outside perimeter
of roof curb at bolted joints.
Top Mounting Flange
Side Panel
End Panel
(Inlet or Discharge)
***Side panels are split
***Cross Brace
Model
Dimensions Wei g ht* Wei g ht**
A B C D E lbs k g lbs k g
2005
(in)
25.9 78.2 22.9 131.7 53.5 96 43 140 63
(cm)
65.8 198.6 58.2 334.5 135.9
2010
(in)
39.3 102.5 36.3 155.5 51.4 133 60 179 81
(cm)
99.8 260.3 96.8 395.1 128.1
2010B
(in)
47 93 42.1 143.2 47.9 130 59 173 78
(cm)
119.4 236.2 111.6 363.8 119.2
2020
(in)
53.5 113.6 48.9 183 69 153 69 216 97
(cm)
135.9 288.5 128.8 464.8 175.3
2030
(in)
76.6 151.8 73.1 215.4 64.6 210 94 268 121
(cm)
194.6 385.6 190.3 547.1 161.5