Ransomes Spider ILD02, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 87 / 92

GB-43
SAFETY, OPERATORS & MAINTENANCE MANUAL
14 WARRANTY
Warranty conditions
This document sets out the extent, conditions and manner of exercising rights stemming from the
Manufacturer’s liability for defects of the delivered Product
1. Dvoøák – svahové sekaèky Ltd., registered office Dvorce 62, Havlíèkùv Brod 58001, Czech Republic, ID
No. 2601379 (further referred to as “Manufacturer”) provides a Warranty for new Products according to the
set regulations for a period of 24 months from the day the Product is delivered to the Customer, or from
such a Product being set into operation, or up to 800 operating hours, according to whichever happens
first. The Warranty period for new spare parts delivered under Warranty expires together with the
Warranty period of the whole Product/machine.
2. Claims stemming from the Warranty must be exercised with the Distributor / Dealer and also resolved by
them. A properly completed Warranty sheet must be presented and all of the inspections prescribed by
the Manufacturer must have been implemented. Incorrect information, additional extracts or overwriting on
the Warranty card lead to loss of the Warranty.
3. The Warranty applies to defects on the Product caused by defective raw materials, construction faults or
made workmanship. Defective parts on the Product will be replaced free of charge with a new part or
repaired. No entitlement to immediate delivery is created and the Manufacturer takes on no liability for
damage claimed for as a result of delayed delivery.
4. The Warranty does not relate to regular wear and tear (parts susceptible to regular wear and tear
especially include the following: blades, blade hubs with bearings, bearings of wheel shafts, spark plugs,
air filters, belts, chains, tires, sealing, hydraulic hoses, winch rope etc…).
5. The Warranty cannot be claimed against if the cause of the defect is:
a) The effects of external mechanical or chemical influences on the Product
b) Unreasonable handling of the Product, overloading it, neglect or incorrect operation
c) Repair of maintenance of the Product performed by a third party, which was not authorised to carry out
such work by the Distributor / Dealer or Manufacturer
d) Installation of such parts into the Product, the use of which is not approved by the Manufacturer
e) Implementation of changes to the Product, which were not approved by the Manufacturer
f) The fact that the Manufacturer’s regulations were not adhered to for handling the Product, its
maintenance and treatment (e-g. the instruction and maintenance manual), especially if the prescribed
Warranty inspections were not carried out
g) The fact that the user neglected declaration and removal of defects, which were apparent when they took
receipt of the Product or which they did not immediately provide notification of an have removed, when
they arose later
6. In case of Products sold with a discount the Warranty does not extend to defect for which the discount
was granted.
7. All claims stemming from the Warranty are forfeit on expiry of the Warranty period. In the case of defects,
for which notification was made during the course of the Warranty period and which were not removed
during this period, this Warranty remains valid until the defect is removed. In this case, the Warranty is
terminated at the latest within 1 month of the last repair or after declaration by the Distributor / Dealer that
the defect was removed or that this does not concern a defect.
8. The Manufacturer is not liable for any economic loss or for any subsequent damage caused to persons or
their property, which was created as a result of failure of the Product.
9. The Warranty will only be valid subject to the condition that the correctly completed part 2 of the
“Combined delivery note” is delivered to the Manufacturer within 14 days of the date the Product is
delivered to the Customer.
10. The Warranty applies to the Product in the condition in which it leaves the production plant. The
Manufacturer is not liable for damage during transportation.
11. In the event of a change in owner, it is possible to transfer the remaining part of the Warranty period to
the new owner if the Manufacturer is requested to do so. The new owner confirms that they have taken
receipt of the instruction manual at the same time as the Product as well as the Warranty conditions and
that they agree with these.