Ransomes Spider ILD02, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 82 / 92

GB-38
SAFETY, OPERATORS & MAINTENANCE MANUAL
11 MAINTENANCE & LUBRICATION
11.16 CHANGING THE WHEEL
• Change the wheels on a level, firm surface
• Turn the wheel so that the tightening nuts are
accessible from the outside
• Stop the engine, remove the key from the
ignition
• Secure the machine against movement.
• Lift the mower and support it under the cutter
deck
• Ensure the machine safe & supported before
working on it.
• Loosen the wheel nuts, remove the wheel
• After repairing it, attach the wheel back in the
reversed order.
• Use suitable tools to unscrew the nuts
To loosen the wheel from a cast-iron three-
spoke hub, unscrew only three nuts M17, the
remaining three bolts hold the two part rim of
the wheel
The two part rim may be removed (bolts
unscrewed) only if tyres are deflated
11.17 TYRE PRESSURE
Keep the specified tyre pressure. Other values may
unfavourably influence the riding characteristics
especially on slopes. You may even loose control of
the machine.
Tyre pressure 150 kPa (1.5bar)
11.18 MOWING HEIGHT ADJUSTMENT
DEVICE
Keep the moving parts of the slide way clean,
undamaged and without an excessive clearance