CP-06-01
5
5
5
5
5
MicroPak Controller - Introduction
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
GENERAL DESCRIPTION
The
MicroPak
MicroPak
MicroPak
MicroPak
MicroPak
TM
TM
TM
TM
TM
Controller
Controller
Controller
Controller
Controller, is used to provide
voltage to the cascade inside the Spray Gun
Assembly.
The MicroPak Controller together with the Spray
Gun Assembly and it’s Low Voltage Cable is a
System. It is unique in that it contains a built-in DC
Power Supply and is capable of operating either 1
or 2 MicroPak control units.
The MicroPak uses a combination of proven high
voltage generation technology including
microprocessor-based control with diagnostic and
communication functions. The processor circuitry
provides the maximum in applicator transfer
efficiency.
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY FEA
FEA
FEA
FEA
FEATURES
TURES
TURES
TURES
TURES
V
V
V
V
Voltage Control
oltage Control
oltage Control
oltage Control
oltage Control
The Over-Current setpoint can be monitored on
the
μ
a Display by pressing the SET push-button
and holding for one second. It does provide a hard
shut-down if the output current exceeds the
setpoint. The kV setpoint is also displayed on the
kV display when the SET push-button is pressed
for one second.
DISPLA
DISPLA
DISPLA
DISPLA
DISPLAYS
YS
YS
YS
YS
The front panel displays for output voltage and
current indicate the true outputs from the cascade
or the tip voltage for indirect charge, and waterborne
applications. They are derived from feedback
signals in the low voltage cable between the
controller and the cascade.
CURRENT CONTROL
CURRENT CONTROL
CURRENT CONTROL
CURRENT CONTROL
CURRENT CONTROL
The current setpoint limits the maximum current
that the cascade can produce. The voltage
setpoint sets the maximum voltage the cascade
can produce. The MicroPak will first attempt to
achieve current output setpoint. If the voltage
setpoint is set low, then the voltage setpoint will not
allow the current setpoint to be achieved.
Содержание MICROPAK A11789
Страница 2: ...CP 06 01 ...
Страница 33: ...CP 06 01 30 30 30 30 30 MicroPak Controller Parts Identification NOTES NOTES NOTES NOTES NOTES ...
Страница 35: ...CP 06 01 ...