Rankam ST1017-012939, Руководство оператора

Страница: 15 / 24

P 15
How to leak Test your LP Gas tank
For your safety:
All leak tests must be repeated each time your LP Gas tank is exchanged of refilled.
When checking for gas leaks do not smoke.
Do not use an open flame to check for gas leaks
Your grill must be leak tested outdoors in a well-ventilated
area, away from ignition sources such as gas fired or
electrical appliances. During the leak test, keep your grill
away from open flames or sparks.
Do not use household cleaning agents. Damage to gas
assembly components can result.
Use a clean paintbrush and a 50/50 mild soap and
water solution.
Brush soapy solution onto LP Gas tank in the areas
indicated by the arrows. See diagram.
If growing bubbles appear do not use or move the LP Gas tank, call an LP Gas Supplier
or your Fire Department.
WARNING
If growing bubbles appear do not use or move the LP Gas tank. Contact an LP Gas Supplier
or your fire department.
WARNING
Before using this gas appliance read all instructions and perform all gas leak-check
procedures even if the product was pre-assembled by the retailer or manufacturer.
LP Gas Model only:
Secure two 20lb LP Gas Tanks to Gas Grill
Turn your LP Gas Tank Valves clockwise to the closed or OFF
position.
Hang your gas tanks on the top Tank Hooks. The ring foot of
the gas tanks will rest on the Tank Holder.
Cylinders Installation Code
The handling, storage, and transportation of all sizes of gas cylinders
must be in accordance with
ANSI/NFPA 58, Storage and Handling of
liquid Petroleum Gases, or the CSA B149.1, Natural Gas and Propane
Installation Code.
LP Gas Model only:
Connect regulator with Hose to your 20lb LP Gas Tanks
Turn all Burner Valves to the OFF position.
Inspect the valve connection port and regulator assembly for damage or debris. Remove any
debris. Never use damaged or plugged equipment.
! !
!
!