27
As you done with sharpness settings, adjust iris lenses. Set the projector to the lines and stripes mode. Set
the exposure for the cameras between 30 and 60 (less if the object, which you are planning to scan is dark
and more if it is bright). By default the value is 45.
Areas illuminated with red mean overlit areas with too bright image.
Configure lenses iris so that the lines on the calibration plate are as bright as possible, but without a
significant amount of excessive light. Image brightness of both cameras must be the same!
Note
In order to better align the same exposure on both chambers, you can leave a small area
with excessive light (red area). The same "figure" of area with excessive light on both
cameras will allow to more accurately set up the diaphragm of lenses.
