Rangevision SPECTRUM, Настройка

Страница: 12 / 28

Select scanning zone
After​ ​ preparatory​ ​ actions​ ​ on​ ​ setting​ ​ up​ ​ the​ ​ computer,​ ​ you​ ​ should​ ​ carry​ ​ the
scanner​ ​ setting​ ​ procedure.​ ​ Select​ ​ Configure​ ​ scanner​ ​ for​ ​ a​ ​ new​ ​ area​ ​ in
Calibration​ ​ window​ ​ on​ ​ the​ ​ Start​ ​ screen​ ​ and​ ​ follow​ ​ the​ ​ instructions​ ​ for​ ​ each​ ​ step.
Before beginning the configuration, select the desired scan area (zone), depending on
the object scanned. Scanning area is a set of interchangeable optics, calibration plate
and stand for the calibration plate, which help to configure the scanner to scan a certain
area. In the majority of cases, scan area is correctly matched, if the size of the object
approximately equals to the size calibration plate.
12