Rangevision SPECTRUM, Настройка

Страница: 7 / 28

Installing software and drivers
Get​ ​ the​ ​ RаngeVisiоn​ ​ software​ ​ (equipped​ ​ with​ ​ the​ ​ scanner)​ ​ and​ ​ run​ ​ the​ ​ installer​ ​ -
RаngeVisiоn​ ​ SсаnCenter​ ​ setup​ .
Following the prompts, select the desired language, type and path for installation.
After the files have been copied install drivers and graphics libraries, necessary for
the correct operation of RangeVision 3D scanner.
If​ ​ you​ ​ have​ ​ access​ ​ to​ ​ the​ ​ Internet​ ​ RangeVision​ ​ ScanCenter​ ​ NG​ ​ will​ ​ automatically​ ​ notify
you​ ​ when​ ​ updates​ ​ are​ ​ available.​ ​ You​ ​ can​ ​ check​ ​ for​ ​ updates​ ​ manually​ ​ by​ ​ clicking
About​ ​ → ​ ​ Check​ ​ for​ ​ Updates​ .
7