Rangevision SPECTRUM, Настройка

Страница: 24 / 28

2. In accordance with the text prompt and symbol image install the calibration plate
in the desired position. The brightness of the images of calibration plate can be
adjusted with exposure controller. You should not allow very dark images or
images with excessive brightness areas. Press the Capture button. Original plate
position - the position at the working distance from the scanner (marking on the
view from cameras matches the markers on the plate), the cross is projected on
the central marker.
3. If the plate placement is incorrect a error message will appear. Correct the
placement and repeat the step.
In​ ​ case​ ​ if​ ​ not​ ​ all​ ​ marks​ ​ are​ ​ found​ ​ on​ ​ the​ ​ image,​ ​ you​ ​ will​ ​ also​ ​ see​ ​ the​ ​ error​ ​ message.​ ​ It
may​ ​ mean​ ​ the​ ​ following:
●
not​ ​ all​ ​ markers​ ​ are​ ​ visible​ ​ on​ ​ one​ ​ of​ ​ the​ ​ snapshots,
● not​ ​ all​ ​ markers​ ​ are​ ​ lit​ ​ by​ ​ the​ ​ projector,
● calibration​ ​ plate​ ​ is​ ​ mounted​ ​ at​ ​ large​ ​ angle​ ​ to​ ​ the​ ​ scanner,
● plate​ ​ is​ ​ too​ ​ close​ ​ or​ ​ too​ ​ far​ ​ from​ ​ the​ ​ scanner​ ​ -​ ​ the​ ​ image​ ​ is​ ​ not​ ​ sharp,
the​ ​ plate​ ​ is​ ​ damaged​ ​ or​ ​ dirty.
Please​ ​ correct​ ​ all​ ​ deficiencies​ ​ and​ ​ press​ ​ Capture​ .
24