Ranger R76ATR Скачать руководство пользователя

Страница: 8 / 88

R76 Series of Tire Changers

P/N 5900346 — Rev. C — Dec. 2019

Tire Changer components include:
•

Turntable

. Holds the Wheel.

•

RimGuard™ Wheel Clamps

. Durable, hardened plastic Clamps do not damage expensive

Wheels as they hold the Wheel in place.

•

Main Tower

. Holds the Mount/Demount Head, tilts back so you can get it out of the way.

•

Mount/Demount Head

. Located on the bottom of the Shaft on the Main Tower, the

Mount/Demount Head is used to both mount and demount Tires. The Tire Changer comes with

two Mount/Demount Heads, one alloy-steel and one plastic polymer.

•

Shaft

. Moves the Mount/Demount Head up and down.

•

Shaft Cap

. Use to move the Shaft down to the desired height.

•

Control Button

. Locks and unlocks the Shaft and the Slide.

•

Bead Breaker

. Used to break the Beads of Tires before you demount them. Includes a Handle,

Blade, and adjustable mechanism for pushing the Blade inwards to break the Bead.

•

Bead Lifting Tool

. Basically a Tire Iron you use to pull the Bead edge of a Tire over the

Mount/Demount Head so the Tire can be demounted from the Wheel. Can also be used to hold

down a Tire Sidewall during Tire mounting.

•

Inflation Gauge

. Shows the amount of air pressure in the tire. Includes an Air Chuck with self-

gripping clip, so you do not have to hold the Air Chuck in place as you inflate a Tire.

•

Turbo-Blast™ Bead Sealer

. Directs a burst of air pressure to help seal a difficult Bead.

•

Clamps Foot Pedal

. Moves the Clamps to the opposite position. If in, they move out. If out,

they move in.

•

Bead Break Foot Pedal

. Moves the Bead Breaker Blade in.

•

Inflation Foot Pedal

. Controls putting air into a Tire. On left side of unit, not the front.

•

Turntable Foot Pedal

. Rotates the Turntable. Press down and hold down to rotate the

Turntable clockwise, press up and hold up to rotate the Turntable counter-clockwise.

•

Tilt Foot Pedal

. Press and release to move the Main Tower to the opposite position: if close,

moves it back; if back, moves it close.

•

Regulator/Filter and Oiler/Lubricator

. Control and route the incoming air.

•

Assist Tower

. R76ATR only. Holds several tools that can be used during mounting and

demounting.

•

Restraint Cone

. R76ATR only. Used to hold the Wheel in place during inflation or to press down

on the Wheel for external clamping.

•

Bead Roller

. R76ATR only. Holds the Sidewall of a Tire down during mounting; stays in a fixed

position on the Tire as the Turntable turns the Tire.

•

Assist Tool

. R76ATR only. Holds the Sidewall of a Tire down during mounting; stays on the

same spot as the Turntable turns the Tire.

•

Helper Disc

. R76ATR only. Holds up the Tire so it can be demounted.

•

Assist Tower Controls

. R76ATR only. Raises and lowers the Assist Tower Arms.

•

Storage Cabinet

. R76ATR only. For storing things you want to have nearby.

Tire Changer accessories include:
•

Lube Bucket

. Holds Tire Lubricant.

•

Lube Brush

. Spreads Tire Lubricant.

•

Extra Air Line Parts

. Provided in case they are needed in the future.

•

Extra Yellow Plastic Pieces

. Provided in case they are needed in the future.

Содержание R76ATR
























































































Результаты поиска

Содержание R76ATR

Отзывы:

Похожие инструкции для R76ATR

Бренды по названию

Популярные бренды

Ranger R76ATR, Инструкция по установке и эксплуатации

Результаты поиска

Содержание R76ATR

Отзывы:

Похожие инструкции для R76ATR

Бренды по названию

Популярные бренды