Ranger R76ATR Скачать руководство пользователя

Страница: 31 / 88

R76 Series of Tire Changers

P/N 5900346 — Rev. C — Dec. 2019

Bead Breaker

Use the Bead Breaker to break the Beads of the Tires you are changing.
Remember that the Beads of a Tire must be broken on

both sides

of the Tire.

⚠

WARNING

Do not break the Beads of a Tire until you are certain the Tire is fully
deflated

. Breaking the Bead of a Tire with air still in it could injure you or others

nearby. The best way to be sure the Tire is fully deflated is to remove the Valve

Core and wait for all of the air to come out.

Top view. Not necessarily to scale. Not all components shown.

⚠

WARNING

There is a risk of crushing with the Bead Breaker

. Do not hold onto the

Blade Handle when the Bead Breaker is moving. After positioning the Bead Breaker

Blade, move away from the Bead Breaker, and make sure the area is completely
clear

before

pressing the Bead Breaker Foot Pedal.

The main parts of the Bead Breaker are:
•

Bead Breaker Mechanism

. Moves in and out under the control of the Bead Breaker Foot

Pedal. Moves with great force; make sure you are completely clear of the Blade and the Bead
Breaker Mechanism

before

pressing the Bead Breaker Foot Pedal.

•

Blade

. The part of the Bead Breaker that contacts the Tire and actually breaks the Bead.

•

Blade Handle

. Controls the Blade, moving it side to side and in and out.

•

Pad

. The side of the Tire whose Bead is

not

being broken goes up against the Pad.

•

Adjustment Pin

. Allows you to accommodate Tires of different sizes by controlling the location

of the Blade.

To use the Adjustment Pin

: remove it from its current location, then slide it into the other

location.

Содержание R76ATR
























































































Результаты поиска

Содержание R76ATR

Отзывы:

Похожие инструкции для R76ATR

Бренды по названию

Популярные бренды

Ranger R76ATR, Инструкция по установке и эксплуатации

Результаты поиска

Содержание R76ATR

Отзывы:

Похожие инструкции для R76ATR

Бренды по названию

Популярные бренды