Ranger R76ATR Скачать руководство пользователя | Manualshive

Страница: 15 / 88

background image

R76 Series of Tire Changers

15

P/N 5900346 — Rev. C — Dec. 2019

Unpacking

Once you have found an appropriate location for the Tire Changer, you can move it into position, take

off the Cover, and then take it off the Pallet.

Use caution when taking the Tire Changer out of its shipping container

. You do not

want to damage the unit, misplace any of the components that come with it, or hurt anyone.

⚠

WARNING

Make sure to use an appropriate lifting device, such as a Forklift or Pallet Jack, to
move the Tire Changer while it is on its Pallet. Make sure

only

personnel who are

trained in and experienced with material handling procedures are allowed to move
the Tire Changer. The Tire Changer is heavy and the weight is not evenly

distributed; dropping or knocking over the unit may cause equipment damage or

personal injury. BendPak Ranger recommends having at least two people work

together to move the Tire Changer.

We recommend unpacking the Tire Changer as close as possible to where you are going to set it up.

To unpack the Tire Changer

:

1.

At the bottom of the Cover, push all of the metal tabs all the way down, on all four sides.
You may have to apply some force to get all of the metal tabs free; they sometimes stick.

2.

Lift the Cover off.

⚠

CAUTION

Ranger recommends having at least two people lift the Cover off; it is heavy and
awkward. If it is dropped or falls, it could cause injury or equipment damage.

3.

Remove the Accessory Box.

4.

Remove the shipping bolts that hold the Tire Changer to the Pallet.

5.

Move the Tire Changer off the Pallet, then move it to the desired location.
The Tire Changer can be moved off the Pallet using a Forklift under the left side or by lifting it using
an appropriate lifting device (such as a Shop Crane) with a strap secured around the top of the
Main Tower (for the R76LT) or the top of the Main Tower

and

the Assist Tower (for the R76ATR).

Use care when moving the Tire Changer off the Pallet

.

6.

Remove the plastic wrap around the Tire Changer and other components.

7.

Untie the components that are tied together.

«
...
13
14
15
16
17
...
»

Содержание R76ATR

























































































Отзывы:

Нет отзывов

Похожие инструкции для R76ATR

Бренд: Hunter Страницы: 52

Бренд: TECO Страницы: 36

Бренд: Dannmar Страницы: 84

Бренд: CAE Страницы: 42

Бренд: BOXER Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды