PM7000 Start Guide Issue 1 090608 29
The
screen shows the channels with functions selected to be recorded using the Adaptive
Store process, in this case we are measuring voltage on Phase A only.
The
screen shows the input signals available to you with the particular hook up.
In the PM7000 you have the facility to rank the wave sets, choose a time during which the trigger is
captured, allows you to decide which signals to capture, which type of fault condition to trigger and
how much memory to allocate to each type. The
screen shows you how the logger is set up.
(How to set up Waveform Capture is explained in detail in the Manual).
We assume we are satisfied with the set ups (factory) for this initial exercise so we can now start the
recording. To do this we go up the menu tree using the
button until we arrive back at the
Main Menu screen.
