Ranger CB-30L, Инструкция по установке и эксплуатации

Страница: 7 / 12

7
This unit has a Control Panel and a Remote Control with
simple buttons for easy usage. Point the Remote Control
to the receiver to start operation.
1. Press “ON/OFF switch.
2. Press “COOL” button to activate cooling function, then
the water pump will pour the cooling pad for a minute and
the fan will work. (NOTE: “COOL” button also serves as
water injection on Cooling Pad).
3. Press “SPEED” for desired speed (Low, Medium
High).
4. Press “SWING” if desired.
5. Press “TIMER” button, if you need to set time. Start
the machine, press “TIMER”, to shut down the unit at a
regular time, then press it until “00” shows on the screen,
which means the canceling of the function of setting time.
Press “TIMER”,
6. Press “SWING” to move the louvers side to side and
help circulate cold air more efficiently.
7. “ION” button. Built-in ionizer to release negative ions
for cleaner air. Press this button and built-in ionizer will
start to purify the air.
CB-30L Control Panel
CB-30L Remote Control
NOTE:
FILL UP WATER TO “MAX” LEVEL ONLY,
OTHERWISE IT MAY OVERFLOW.
NOTE:
CLEAN WATER MUST BE USED TO
OPERATE THIS UNIT.
POUR WATER SLOWLY ON THE LEFT SIDE
OF THE UNIT (WATER INLET)
TO AVOID WATER SPILLAGE AND PREVENT RISK
OF ELECTRIC SHOCK.
CONTROL FUNCTIONS
Turns device
on/off
ON/OFF
SWING
RECEIVER
COOL
ION
Air Speed:
High, Medium,
Low
SPEED
Turns Swing
function on/off
Starts or Stops
the ionizer
function.
Activates Timer
feature
Start the cooling
function. Pump
will circulate
water for one
minute before
the fan begins.