4
IMPORTANT SAFETY INSTRUCTIONS
Please read entire manual prior to installation. Do not operate this machine until you read and understand all the
dangers, warnings and cautions in this manual.
Stay clear of any moving parts that may fall and cause injury. When
using your CB-30L Cool Boss Portable Evaporative Air Cooler basic safety precautions should always be followed,
including the following:
1. Read and understand instructions and
all warning labels.
2.
NEVER
operate if there is any damage
to the plug or cord.
3.
DO NOT
route power cord under car-
peting or flooring.
4.
ALWAYS
unplug the electric cord
before performing inspections or repairs.
5.
NEVER
cover power cord with throw
rugs, runners or similar coverings.
6.
ALWAYS
remove plug from electrical
receptacle by pulling on the plug and not the cord.
7. Minimize trip hazard by routing power cord away from
pedestrian traffic areas.
8. Plug into three-prong grounded GFCI protected
electrical receptacle only.
9.
NEVER
step on or roll over power cord with heavy or
sharp objects.
10.
DO NOT
operate unit unless media pads are securely
in place.
11.
DO NOT
operate this equipment with any covers,
panels or inserts removed.
12.
ALWAYS
test the GFCI receptacle or breaker monthly
to ensure proper function.
13.
DO NOT
operate near open containers or flammable
liquids or gases.
14. Ensure cooler pumps are running continuously to
saturate and wet media pads at all times during
operation.
15.
ALWAYS
maintain a distance of at least 50 feet from
any open flame or sparks.
16.
NEVER
spray or wash unit with a garden hose as
water may harm motor and other electrical system
components.
17.
DO NOT
use an extension cord or cord adapters with
this portable cooler.
18.
NEVER
remove ground prong from plug end.
19.
DISCONNECT POWER
before servicing or removing
any panels, covers and doors.
20. Plug into a grounded three-prong GFCI protected
receptacle only.
21. Check power outlet for correct polarity before use.
22.
DO NOT
open control box compartment. No
serviceable parts located inside.
23.
DISCONNECT POWER CORD
before changing
media or opening fan housing.
24.
NEVER
modify this equipment in any way or warranty
will be voided.
25. All repairs must be done by authorized technician.
IMPORTANT
REQUIRED POWER SOURCE
Before connecting power supply, check to
see if unit is equipped with a dual-voltage
selector switch. If so, position switch
setting to correct inline voltage. Connect
to proper 115/208-230 volt AC, 50/60Hz,
1-phase, 20 amp, fused and grounded
electrical supply.
It is recommended that a separate circuit serving only
the cooler unit be provided. Use an outlet that cannot be
turned off by a switch. DO NOT use an extension cord.
When making electrical connections, insure that local
and national codes are adhered to. Use only with GFCI
protected receptacles
Содержание CB-30L
Страница 12: ...12...