Ranger 3DP4100 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 135

background image

READ THIS ENTIRE MANUAL

BEFORE OPERATION BEGINS

RECORD HERE THE FOLLOWING INFORMATION

WHICH IS LOCATED ON THE SERIAL NUMBER DATA TAG

PRODUCT WARRANTY

Your new alignment system is warranted for one year on equipment structure; one year on all operating components and
tooling/accessories, to the original purchaser, to be free of defects in material and workmanship. The manufacturer shall
repair or replace at their option for this period those parts returned to the factory freight prepaid which prove upon inspection
to be defective. The manufacturer will pay labor costs for the first 12 months only on parts returned as previously described.

The warranty does not extend to:

1. Defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required
maintenance.
2. Damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions provided in
the owner’s manual(s) and/or other accompanying instructions supplied.
3. Normal wear items or service normally required to maintain the product in a safe operating
condition.
4. Any component damaged in shipment.
5. Other items not listed but may be considered general wear parts.
6. Damage caused by rain, excessive humidity, corrosive environments or other contaminant’s.

THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH

EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS,

DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR

MALFUNCTION OF A BENDPAK INC./ RANGER PRODUCT OR THE BREACH OR DELAY IN

PERFORMANCE OF THE WARRANTY.

WARRANTY IS NOT VALID UNLESS

WARRANTY CARD IS RETURNED

No part of this publication maybe translated, stored in an electronic retrieval system, reproduced, or partially or totally
adapted by any means (including microfilm and Photostats) without prior permission. Copyright © 2011 RANGER All rights
reserved. Dell, Canon, Microsoft, Windows 7, MS and MS-DOS are registered trademarks. Windows and the Windows logo
are trademarks of Microsoft Corporation. IBM is a registered trademark of IBM Corporation.

3

«
1
2
3
4
5
...
»

Содержание 3DP4100








































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3DP4100

Бренд: XTA Страницы: 29

Бренд: vc999 Страницы: 59

Бренд: Qtx Страницы: 3

Бренд: Saferoad Страницы: 24

Бренд: Hammer Страницы: 42

Бренд: idi Страницы: 20

Бренд: G&G Страницы: 2

Бренд: H&S Страницы: 46

Бренд: JBL Страницы: 38

Бренд: JBSYSTEMS Light Страницы: 32

Бренд: JBM Страницы: 12

Бренд: Laser Страницы: 2

Бренд: Lars Thrane Страницы: 50

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: Parkside Страницы: 58

Бренд: R&S Страницы: 371

Бренд: R.M. Young Страницы: 9

Бренд: Yamaha Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды