3
TABLE OF CONTENTS
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Operator Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Section 1: Definitions of Hazard Levels . . . . . . . . . . . . . 4
Owner’s Responsibility . . . . . . . . . . . . . . . . . 4
Section 2: Safety Instructions . . . . . . . . . . . . . . . . . . . . 5
Section 3: Tire and Wheel Service Safety Instructions . . 6
Section 4: Description of Parts . . . . . . . . . . . . . . . . . . . .7
Section 5: Specifications / Tools Required . . . . . . . . . . 8
Section 6: Lifting / Uncrating Instructions. . . . . . . . . . 9-10
Section 7: Installation Location . . . . . . . . . . . . . . . . . . .11
Section 8: Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 12
Section 9: Anchoring / Air Source/ Oiler Adjustment .13-14
Section 10: Electrical / Wiring Instructions . . . . . . . . 14-15
Section 11: Operating Instruction . . . . . . . . . . . . . . . . . .16
Bead Loosening and Demounting . . . . . . . . 16
Important Wheel Mounting Instructions . .17-21
Section 12: Custom and Special Wheels . . . . . . . . . . . 22
Demounting Tube Tires . . . . . . . . . . . . . . . 22
Section 13: Mounting. . . . . . . . . . . . . . . . . . . . . . . . 23-25
Section 14: Mounting Tube Type Tires . . . . . . . . . . . . . 25
Section 15: Inflation / Inflation Pedal Operation. . . . . . . 26
Section 16: Stages Of Inflation . . . . . . . . . . . . . . . . . . . 27
Stage One: Wheel Restraint . . . . . . . . . . . . 27
Stage Two: Bead Sealing . . . . . . . . . . . 27- 28
Stage Three: Bead Seating . . . . . . . . . . . . 29
Stage Four: Tire Inflation . . . . . . . . . . . . . .30
Section 17: Maintenance Instructions . . . . . . . . . . . . . . 31
Mount / Demount Head . . . . . . . . . . . . . . . 31
Water Separator/ Oiler . . . . . . . . . . . . . . . 32
Turntable Drive Belt . . . . . . . . . . . . . . . . . . 33
Inflation Pedal Pressure Limiter Maintenance.33
Critical Safety Warnings / Instructions . . . . . . . . . . . . . 35
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-53
Failure to follow danger, warning, and caution instructions
may lead to serious personal injury or death to operator or
bystander or damage to property.
Do not operate this machine until you read and understand
all the dangers, warnings and cautions in this manual.
For additional copies
or further information, contact:
BendPak Inc. / Ranger Products
1645 Lemonwood Dr.,
Santa Paula, CA. 93060
1-805-933-9970
www.bendpak.com
www.rangerproducts.com
OPERATOR PROTECTIVE EQUIPMENT
Personal protective equipment helps make tire changing
safer. However, equipment does not take the place of safe
operating practices. Always wear durable work clothing
during tire service activity. Shop aprons or shop coats
may also be worn, however loose fitting clothing should
be avoided. Tight fitting leather gloves are recommended
to protect operators hands when handling worn tires and
wheels. Sturdy leather work shoes with steel toes and oil
resistant soles should be used by tire service personnel to
help prevent injury in typical shop activities.
Eye protection is essential during tire service activity.
Safety glasses with side shields, goggles, or
face shields are acceptable. Back belts
provide support during lifting activities and
are also helpful in providing operator
protection. Consideration should also be
given to the use of hearing protection if tire service
activity is performed in an enclosed area, or if noise levels
are high .
THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH IF NOT FOLLOWED
COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS
AND CAN CAUSE PERSONAL INJURY OR DEATH. READ AND FOLLOW ALL INSTRUCTIONS IN
THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
