9
SECTION 6
LIFTING/ UNCRATING
1. The R26AT/ R26DT are shipped on a pallets.
(See Fig 6.1)
Approximate shipping dimensions:
R26AT/ R26DT
46” x 54” x 72” (1169mm x 1372mm x 1829mm)
CAUTION!
Handling of the machine must be performed only with
an appropriate lifting device such as a forklift or pallet
jack. Only personnel who are experienced and
qualified on material handling procedures should
handle any transportation or moving of machine
.
CAUTION!
Be careful when cutting steel banding material as items
may become loose and fall causing personal harm or
injury. Always wear gloves when uncrating the machine to
prevent scratches, abrasions, or cuts due to the contact
with packing materials. Eye protection is essential during
uncrating service activity. Safety glasses with side shields,
goggles, or face shields are acceptable.
Remember to report any shipping damage to the carrier
and make a notation on the delivery receipt.
Uncrating Instructions
1. Carefully cut the metal strapping and remove.
2. Using a crow bar or pry bar, locate the staple/nail/tab
locations and pry off the bottom part the box. Note: the
entire box can be lifted off after prying the staples/nails/tabs
at the base of the carton. (See Fig 6.3)
CAUTION!
Secure the Bead Breaker Arm prior to removing all the
plastic wrapping/strapping as the Bead Breaker Arm may
have shifted during shipping.
3. Cut and remove the plastic wrapping. (See Fig 6.4)
Fig. 6.4
Fig. 6.3
Fig. 6.1
Fig. 6.2
