12
SECTION 8
R26LT / R26DT ASSEMBLY
Bead Breaker Arm
1. Remove the Bead Breaker Arm Pin and the Bead
Breaker Shaft Nyloc Nut. (See Fig. 8.1)
2. Align the Hole in the Beak Breaker Arm and insert the
Bead Breaker Pivot Pin. (See Fig. 8.2)
3. Align the Bead Breaker Cylinder Shaft with the
Cylinder Shaft Pin. Rotate Pin so the flat side is on the
same side as the Nut. (See Fig. 8.3)
4. Using a long stiff wire hook or pliers. Stretch the
Return Spring and clip to the Bead Breaker arm.
(See Fig. 8.4)
Demount Head Assembly
1. Check that the Demount Head Bolt and Allen Screws
are tightened. (See Fig. 8.5)
Tool Tray
1. Bolt the Tool Tray to the Assist Tower as shown.
(See Fig. 8.6)
Fig. 8.1
Fig. 8.2
Fig. 8.3
Fig. 8.6
Fig. 8.4
Fig. 8.5
