8
FEATURES / SPECIFICATIONS
MODEL R26AT / R26DT
Type of Drive System
Air / Electric
Motor
Dual Voltage 110/220V 50/60HZ 1 Ph.
Air Requirement
140-165 PSI (10-11 BAR)
Wheel Clamping Method
4 Rim-Guard Clamps - Internal / External
Table Clamping System
Dual Pneumatic Cylinders
Bead Breaking System
Pneumatic Blade / Dual Settings
Turntable Speed -360-Degree Rotation
6.9 Seconds
Tool Holder
Pneumatic Lock
Adjustable Turntable Clamps
Standard
Inflation System
Standard
Inflation Pressure Regulator/Limiter
Standard
Water Filter
Standard
Oiler / Lubricator
Standard
Air Regulators
(Inflator, Assist Tower)
Standard
Bead Lifting Tool
Standard
Large Soap / Lubricator Bucket
Standard
Brush
Standard
Tower Design
Tilt Back
Powerful "Turbo -Blast" Bead Seating System
Standard
Tire Inflation
Standard
Tool Tray / Bin Storage
Standard
Internal Wheel clamping Capacity x
14.5" – 29.75" (368 mm – 755 mm)
External Wheel clamping Capacity x
13.5" – 28.8" (343 mm – 731 mm)
Turntable Tire Width Capacity (Mounting)
4.5" – 19" (114 mm – 482 mm)
Bead Breaker Tire Width Capacity (Demounting)
1.5" – 15.5" (38 mm – 393 mm)
Maximum Tire Diameter
48" (1219 mm)
Shipping Weight
R26AT: 690 lbs. (313 Kg) / R26DT: 1,050 lbs. (477Kg)
Specifications are subject to change without notice.
x NOTE: Internal and External Wheel clamping dimensions do not translate directly to rim or tire sizes as Wheel
clamping points may vary by manufacturer.
SECTION 5
FEATURES / SPECIFICATIONS: MODEL R26AT / R26DT
Tools required.
1. Pallet jack or forklift for moving crate.
2. Shop crane.
3 Utility knife.
4. Crow bar or pry bar.
5. Tin Snips or Sheet Metal Snips
6. Hammer.
7. Open end metric wrenches and/or socket set.
8. Phillips and Slot head screw drivers.
9. Metric Allen Key set.
Parts required but not supplied
.
1. Teflon tape
2. Air fitting to match shop Air Supply line.
3. Tool Oil.
4. Anchor Bolts and Shims (if anchoring).
