Rane Zonetech, Руководство пользователя

Страница: 14 / 52

14
Stream
Bluetooth
In addition to the six audio inputs on the rear panel, you can send an audio signal wirelessly
from a Bluetooth device to Zonetech. This signal uses its own input channel.
To pair / connect your Bluetooth device to Zonetech :
1. On Zonetech, press and hold the Bluetooth button for 5 seconds . Zonetech's Bluetooth
Light will flash, indicating it is in Pairing Mode and searching for a nearby Bluetooth
device. (Doing this will disconnect Zonetech from a Bluetooth device that is currently
paired.)
2. OnyourBluetoothdevice,enteritssettings,find Zonetech andconnecttoit.Zonetech’s
Bluetooth Light will be solid blue when it is paired.
To unpair / disconnect your Bluetooth device from Zonetech , press and hold Zonetech’s
Bluetooth button for 5 seconds . Zonetech will disconnect from your Bluetooth device.
To stream the Bluetooth audio signal to an input
on Zonetech
:
1. On Zonetech, press and release the Bluetooth
button. Stream will appear at the top of the
display as well as the name of the streaming
device.
2. Use the Left / Right (

/

) buttons to selectthe
Stream Source ( ??? ) setting.
3. Turn the Info knob to select the Bluetooth
option. Zonetech is now configured to receive
a Bluetooth audiosignal.
4. Press and release the Zone button ( 1 – 6 ) forthe
zone where you want to send the Bluetooth
audiosignal.
5. Use the Left / Right (

/

) buttons to selectthe
Input Source ( In Source ) setting.
6. Turn the Info knob to select the Stream option.
That zone is now receiving the audio signal
from your Bluetoothdevice.
Notes :



If your device requires a passcode or PIN, enter 0000 .
If your Bluetooth device is not able to connect to Zonetech, press Zonetech’s Bluetooth
button to disconnect previous Bluetooth connections, and try the above steps again.
If you experience trouble connecting or playing music, make sure your Bluetooth device’s
operating system is up to date.