background image

WARRANTY PROCEDURE - Only Valid in the USA

NOTICE! You must complete and return the warranty card or register your 

product online to extend the Warranty from 2 years to 3 years!

TO VALIDATE YOUR EXTENDED WARRANTY: Use the postcard that came in the box with your unit, or go to 

www.rane.com

 and 

click on 

New Product Registration

. Fill out the warranty completely, being sure to 

include the model and serial number

 of the unit 

since this is how warranties are tracked. If your Rane product was purchased in the USA, mail the completed card or register online with 

to Rane Corporation within 10 days from the date of purchase. 

If you purchased the product outside the USA you must file your 

warranty registration with the Rane Distributor in that country.

 It is advised that you keep your bill of sale as proof of purchase, 

should any difficulties arise concerning the registration of the warranty card. 

NOTICE:

 IT IS NOT NECESSARY TO REGISTER IN 

ORDER TO RECEIVE RANE CORPORATION’S STANDARD TWO YEAR LIMITED WARRANTY.

WARRANTY REGISTRATION is made and tracked by 

model and serial numbers only

, not by the purchaser’s or owner’s name. 

Therefore any warranty correspondence or inquires 

must

 include the model and serial number of the product in question. Be sure to fill 

in the model and serial number in the space provided below and keep this in a safe place for future reference.

WARRANTY SERVICE MUST BE PERFORMED ONLY BY AN AUTHORIZED RANE SERVICE FACILITY LOCATED IN 

THE COUNTRY WHERE THE UNIT WAS PURCHASED, OR (if product was purchased in the USA) AT THE RANE FACTORY 

IN THE USA. If the product is being sent to Rane for repair, please call the factory for a Return Authorization number. We recommend 

advance notice be given to the repair facility to avoid possible needless shipment in case the problem can be solved over the phone. 

UNAUTHORIZED SERVICE PERFORMED ON ANY RANE PRODUCT WILL VOID ITS EXISTING FACTORY WARRANTY.

FACTORY SERVICE

If you wish your Rane product to be serviced at the factory, 

it must be shipped fully insured, in the original packing box or equivalent

This warranty will 

not

 cover repairs on products damaged through improper packaging. If possible, avoid sending products through the 

mail. Be sure to include in the package:

1.  Complete return street shipping address (P.O. Box numbers are 

not

 acceptable).

2.  A detailed description of any problems experienced, including the make and model numbers of any other system equipment.

3.  Remote power supply, if applicable.

Repaired products purchased in the U.S. will be returned prepaid freight via the same method they were sent to Rane. Products purchased 

in the USA, but sent to the factory from outside the USA 

must

 include return freight funds, and the sender is fully responsible for all 

customs procedures, duties, tariffs and deposits.

In order to qualify for Rane’s one year extended warranty (for a total of 3 

years parts and labor), the warranty must be completely filled out and sent to 

us immediately. Valid in USA only.

We recommend you write your serial number here in your owners 

manual and on your sales receipt for your records.

SERIAL NUMBER:______________________________________PURCHASE DATE:__________________________________

©Rane Corporation  10802 47th Ave. W.,  Mukilteo WA 98275-5000  TEL 425-355-6000  FAX 425-347-7757  WEB www.rane.com

Warranty-2

108360

Содержание SM 26S

































Отзывы: