VirtualDJ 8
– Rane Sixty-Two
10
18. HIGH.
Full-cut isolator to adjust the high (treble) frequencies of each mixer channel.
19. MID.
Full-cut isolator to adjust the middle (mid) frequencies of each mixer channel
20. LOW.
Full-cut isolator to adjust the low (bass) frequencies of each mixer channel.
E.
Microphone & Video Software Controls
21. MIC ON
. Use this button to turn on/off the
Microphone Input without ducking other inputs.
22. MIC OVER
. Use this button to momentary turn
on the Microphone Input and duck the other
inputs by 10 dB (around 1/3). On release, the
microphone input is turned off.
23. MIC LEVEL
. Use this knob to adjust the output
level of the microphone input.
24. MIC HIGH
. Full-cut isolator to adjust the high
(treble) frequencies of the microphone input
channel.
25. MIC LOW.
Full-cut isolator to adjust the low (bass) frequencies of the microphone
input channel.
26. MIC FLEXFX.
Use this button to route the applied FLEXFX effects on the
Microphone Input.
Video mode
The Microphone section of the Rane Sixty-Two is not controlling the Microphone
section of the VirtualDJ GUI (Master panel) and vice versa. However, the entire
Microphone section can be used as MIDI controls. If you do not use the MIC section
you can independently bypass the controls of this section so that they do not affect
audio and only output their MIDI assigned functions.
To toggle
MIC bypass mode
, hold the
SHIFT
button and then press the
MIC ON
button (21). The led will flash to indicate the MIC bypass mode selection.
