Rane AC 22, Руководство по эксплуатации и обслуживанию

Страница: 8 / 27

AC 22 Mono 3-Way Installation
AC22
Observe the labels BELOW the inputs and outputs for Mono operation.
1. MONO (CH. 1) IN PUT: Plug the output of the mixer, equalizer or other s i gna l source into
this input for mono operation. DO NOT PLUG INTO THE CHANNEL2 INPUT: THIS INPUT
IS USED TO DRIVE TWO CHANNELS WITH THE SAME MONO INPUT. Refer to"AC 22 2-
Channel 2-Way Installation".
*DO NOT USE THIS INPUT FOR3-WAY MONO OPERATION. USE THE CHANNEL 1 INPUT
ONLY.
2. HIGH FREQUENCY OUTPUT:. Connect this output to the input(s) of the high frequency
amplifier.
3. MID FREQUENCY OUTPUT: Connect this output to the input(s) of the mid frequency
amplifier.
4. LOW FREQUENCY OUTPUT: Connect this output to the input(s) of the low frequency
amplifier.
**This output is not used in the Mono 3-Way mode.
5. AC POWER LINE CORD: Plug this into a 120 VAC wall outlet.
6. EXTERNAL POWER JACK: Use only with Rane RS 10 Power Supply (See Rane Note 118 for
details). Cannot be used to power other units. -WARNING: DO NOT PLUG ANY TYPE OF
TELEPHONE EQUIPMENT TO THIS JACK.-
7