Rane AC 22, Руководство по эксплуатации и обслуживанию

Страница: 14 / 27

AC 23 Mono 4-Way or Mono 5-Way Installation
Observe the labels BELOW the inputs and outputs for mono operation.
1. MONO INPUT: Use only this input for mono operation; do not use the Channel 2 input.
As long as no plug is inserted into the Channel 2 input the AC 23 will internally switch itself to
mono operation. Refer to the AC 23 block diagram for further details.
2. SUB WOOFER OUTPUT: Connect this output to the input of the sub-woofer amplifier (or
bass bin amp).
3. LOW FREQUENCY OUTPUT: Connect this output to the input of the low frequency (or
mid-bass) amplifier.
4. MIO FREQUENCY OUTPUT: Connect this output to the input of the mid frequency
amplifier.
5. HI MID FREQUENCY OUTPUT (FOR MONO 5-WAY ONLY): Use this output only fo1
mono 5-way applications. OMIT THIS OUTPUT WHEN USING THE AC 23 AS A MONO 4-
WAY CROSSOVER. AS LONG AS NO PLUG IS INSERTED INTO THIS JACK THE AC 23
INTERNALLY BYPASSES THE HI MIO SECTION AND DEFEATS ALL FRONT PANEL HI MIO
CONTROLS. For mono 5-way connect this output to the input of the Hi Mid frequency
amplifier.
6. HIGH FREQUENCY OUTPUT: Connect this output to the input of the high frequency (or
tweeter) amplifier.
7. AC POWER LINE CORO: Plug this into a 120 VAC wall outlet .
8. EXTERNAL POWER JACK: Use only with Rane RS 10 Power Supply (See Rane Note 118 for
details). Cannot be used to power other units. -WARNING: DO NOT PLUG ANY TYPE OF
TELEPHONE EQUIPMENT TO THIS JACK.-
**DO NOT INSERT ANY PLUG INTO THIS OUTPUT FOR 4-WAY MONO OPERATION.
13