R&S ZVA80, Быстрый старт

Страница: 24 / 31

Basic Operation
R&S
®
ZVA80
24 Quick Start Guide 1312.6808.62 ─ 02
Analyzer settings with active ZVA80-BU mode
In "ZVA80-BU" mode, the frequency and level settings of the network analyzer are auto-
matically set to be compatible with the external test sets. "Low Phase Noise" is enabled,
Automatic Level Control (ALC) is disabled. The frequency and levels of all ports are dis-
played in the "Port Configuration" dialog ("Channel > Mode > Port Config …").
Fig. 3-1: Frequency Converter dialog
3.4 Connecting the External Test Sets
Each of the external test sets must be connected to the R&S ZVA80 base unit, the power
supply and the DUT. Please refer to the following sections for details.
●
H/L SWITCH (control connection): chapter 2.5.4, "Connecting the Control Cable" ,
on page 17
●
RF connection: chapter 2.5.5, "Connecting RF Cables" , on page 17
●
Power supply: chapter 2.5.6, "Connecting the Converter to the DC Supply" ,
on page 20
●
DUT (usually connected after calibration): chapter 2.5.8, "Mounting a DUT" ,
on page 21
Connecting the External Test Sets