Command Reference
R&S
®
ZNC
524
User Manual 1173.9557.02 ─ 13
Manual operation:
See
MMEMory:STORe:LIMit
<TraceName>, <LimLineFile>
Saves the limit lines associated to a specified trace to a limit line file. Limit lines are
created using the
CALCulate<Chn>:LIMit...
commands.
Setting parameters:
<TraceName>
Name of an existing trace in the active recall set (string parameter)
for which a limit line definition exists.
<LimLineFile>
String parameter to specify the name and directory of the created
limit line file. The default extension (manual control) for limit line
files is *.limit, although other extensions are allowed. If no path is
specified the analyzer uses the current directory, to be queried
with
.
Example:
See
Usage:
Setting only
Manual operation:
See
MMEMory:STORe:MARKer
<AsciiFile>
Saves the values of all markers to a ASCII file.
Setting parameters:
<AsciiFile>
String parameter to specify the name and directory of the created
ASCII file. The default extension (manual control) for marker files
is *.txt, although other extensions are allowed. If no path is speci-
fied the analyzer uses the current directory, to be queried with
. An example for the file contents is
given below.
Example:
*RST
Reset the analyzer, creating the default trace no. 1 in channel no.
1.
CALC:MARK ON; MARK:X 1GHz
Create marker no. 1 and place it to 1 GHz.
CALC:MARK2 ON; MARK2:X 2GHz
Create a second marker and place it to 2 GHz.
MMEM:STOR:MARK 'Marker.txt'
Store the marker values to an ASCII file. The file contains both
marker values, e.g.:
Trc1 S21
Mkr 1 1.000000 GHz -4.900 dB
Mkr 2 2.000000 GHz -6.807 dB
Usage:
Setting only
Manual operation:
See
SCPI Command Reference
