manualshive.com logo in svg

R&S RTC1000, Руководство пользователя, Страница: 114 / 371

Поделиться
Скачать
R&S RTC1000 Скачать руководство пользователя страница 114

Signal Generation (Option R&S

 

RTC-B6)

R&S

®

RTC1000

114

User Manual 1335.7352.02 ─ 02

10 Signal Generation (Option R&S

 

RTC-B6)

The signal generation option R&S

 

RTC-B6 provides a function generator and a pattern

generator. You can find the generator settings in the UTIL menu.

To load a predefined function or pattern

The instrument provides a predefined pattern files for the important functions and pat-
terns.

1. Press the SAVE/RECALL key.

2. Press "DEVICE SETTINGS".

3. Press "LOAD".

4. Use the Universak knob to select one of the predefined patterns (*. SCP files) from

the internal memory.

5. Press "LOAD".

10.1 Function Generator

Using the function generator, you can generate input signals for circuits testing and
other purposes. The generated signal is output at the AUX OUT connector.

1. Press the UTIL key in the Vertical section.

2. Press "FUNCTION GEN".

3. Select the parameters of the generated waveform. The parameters are described

below.

An information box shows a preview of the generated waveform with the selected
parameters.

4. To deactivate the function generator, press "OFF".

FUNCTION

Selects the waveform. The following waveforms can be generated and output at the
AUX OUT connector:

●

DC

●

Sine: Frequency range from 0.1 Hz to 50 kHz

●

Rectangle: Frequency range from 0.1 Hz to 50 kHz

●

Pulse: Frequency range from 0.1 Hz to 10 kHz

●

Triangle: Frequency range from 0.1 Hz to 10 kHz

●

Ramp: Frequency range from 0.1 Hz to 10 kHz

FREQUENCY

Selects the signal frequency. The available range depends on the selected function.

 

 

Function Generator

Содержание RTC1000




















































































































































































































































































































































































Отзывы:

Нет отзывов